Air curtain systems AVANTGARDE/TWISTO/ORA/SAMUM/VIRADO
18
Mounting of a thermal static control valve
In case of delivery air curtain system with an thermostatic valve for output temperature
control these valve have to be integrated into the heating circuit and the temperature sensor
PXVWÀ[HGLQVLGHWKHDLUFXUWDLQGHYLFH
&RQYLQFHRQHVHOIWKDWDOOQHHGHGSDUWVDUHFRPSOHWHO\EHIRUHVWDUWPRXQWLQJ
7KHDVVHPEO\NLWÅ7KHUPRVWDWLFYDOYHDFFHVVRU\NLW´FRQVLVWVRI
•
9DOYHEDVHERG\VWUDLJKWZD\YDOYHRUZD\YDOYHLQFOXGLQJÀWWLQJVDQGVFUHZ
-
caps
•
7HPSHUDWXUH FRQWUROOHU YDOYH KHDG ZLWK FDSLOODU\ WXEH P RU P LQFOXGLQJ
sensor cartridge
• Sensor panel with toggle screwing
Assembly
•
'XULQJFRQQHFWLQJWKHDLUFXUWDLQGHYLFHLQWHJUDWHWKHYDOYHEDVHERG\LQWKHÁRZSLSH
5HJDUGWKHÁRZGLUHFWLRQVKRZQRQWKHYDOYHEDYLQJDZD\YDOYHFRPSOHWH
the requested entirely heating circuit.
Observe the circumstance that the
3-way valves are divider valves.
•
)L[WKHYDOYHKHDGFRQWUROOHU
on the valve body
WKUHDG0[
• Lever out the blind plug
on the top side or on
the side panel and
unscrew the two
neightboring screws.
• Put the sensor panel at
this place and screw down
it with these screws.
• At type TWISTO the
capillary tube is to lead
throught the socket resp.
the wall or ceiling moun-
ting brackets into inside
WKHXQLW$ÀWWLQJSDQHO
inside is prepaired to take
up the sensor panel.
• Unroll the capillary tube,
avoid hard bends and turnings.
Snap off will destroy
the capillary tube!
• Insert the sensor cartridge into the sensor panel and lock the cartridge by screwing the
screwcap.
• Set the controller correspondending to the chart below. We recommend an air outlet
WHPSHUDWXUHRI&
Scale
1
2
3
5
6
Air outlet
temperature
FD&
FD&
FD&
FD&
FD&
FD&
&
Einzelheit „X“
Heizungsanschlüsse
Geräteaufhängung
Einzelheit „X“
VL
RL
heating connections
suspension
GHWDLOÅ;´
GHWDLOÅ;´
ÁRZ
return
