
7
TX-150M
LED
EN
G
LI
SH
To charge your radio, carefully follow these instructions:
1. Connect the power adaptor to the main power supply and
connect the adaptor power plug to the charging cradle.
2. Disconnect any radio accessories and ensure the radio is
switched off.
3. Insert the radio into the charging cradle until it 'clicks' home.
The charger LED will glow red and charging will start. If the
charger LED blinks red and green or the charger LED does
not light, re-insert the radio into the charging cradle.
4. The battery charging time is typically 12 to 15 hours. When
the battery is fully charged the charger LED will turn green.
4. Battery Charging
Charge Cradle
Adaptor Power Plug
Power Adaptor :
- Input: 230VAC
- Output: 9VDC
SCAN
MENU
D/T
SCAN
MENU
D/T