TTikorea TSC-100RA Скачать руководство пользователя страница 18

INSTRUCTION MANUAL

18

ENGLISH

TROUBLE SHOOTING

If you experience problem with your 

,

 

first  check the battery power 

level as low battery can cause problems such as weak reception and reduced 

sound quality.

Then check the manual and receiver display to ensure that a function such as Lock or 
Scan has not been activated by accident.

If these steps do not solve the problem, reset your unit as follows.

1. Partial Reset

1) Turn off your unit.

) Press and hold the 

MENU

 and the 

STEP

 keys together.

3) Turn on your unit.

4) Memory Clear(MEM CLr) appears.

This will erase all the memory data from the channel
memory banks. 

If you find problems not solved by this partial reset, try all reset as follows.

2. All Reset

1) Turn off your unit.

) Press and hold the 

E/VFO 

and the

 STEP 

keys together.

3) Turn on your unit.

4) All clear (ALL CLr) appears.

This will not only erase all the memory data but also reset 
all the basic operation data to the original factory default 
settings. This should resolve most problems.
In case of further difficulties, 
please consult your dealer or visit our website at 

www.ttikorea.co.kr

2

1

2

3

2

1

2

3

TSC-100RA

TSC-100R

A

 

Содержание TSC-100RA





















Отзывы: