EN
G
LI
SH
10. Trouble Shooting
1)
2)
11. CE Declaration
Switch off the transceiver.
Pressing EMG button, switch on the
transceiver.
This will reset the transceiver, so all the memories are erased and
the parameters return to the initial factory setting.
This should fix most problems. In case of further difficulty, please
consult your dealer or visit our website.
This unit can be used without license and charges in; Austria,
Belgium, Bulgaria,Cyprus, Czech, Denmark, Estonia, Finland,
France,Germanay, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland,Portugal,Pomania, Slovakia, Slovenia, Spain, Sweden,
Switzerland, and U.K.
This warning symbol indicates that this equipment operates
in non-harmonised frequency bands and/or may
be subject to licensing conditions in the country of use.
Be sure to check that you have the correct version of this
radio or the correct programming of this radio, to comply
with your national licensing requirements.
CE versions of the TCB-771 which display the CE
symbol on the product label, comply with the
essential requirements of the European Radio and
Telecommunication Terminal Directive 1999/5/CE.
If this does not solve the problem, reset your transceiver as follows.
If you experience problems with your TCB-771 transceiver, first
check the power supply source. Poor connection of the power
supply source can cause problems such as no transmission, no
reception or poor reception, and weak or no sound. Ensure that the
microphone and antenna are also well connected.
13
TCB-771
