background image

OPERATORS HANDBOOK 5

RISK ASSESSMENT

PRODUCT INFORMATION RISK ASSESSMENT SHEET TTI SPOT PRO

TASK

HAZARDS

RISK

CONTROL MEASURES

1. Partially fill the tank with water, 
start the motor & test the spray unit

Manual handling; slips, trips 
or falls; petrol; fumes; fingers 
jammed; electric shock or 
Electricity.

Concentrate on task; follow safe 
manual handling techniques:-don’t lift 
on your own if > 20kg, bend knees 
&  keep  back  straight;  keep  fingers 
clear; keep unit at least 8m away 
from overhead powerlines; ensure 
AS 3760: 2001 Testing Electrical 
Equipment applies; water away from 
electrical sources.

Med

2. Check weather conditions & 
select the appropriate PPE to suit 
the chemicals to be used

Manual handling; slips, trips 
or falls

Put on PPE as per the chemical 
requirements in the Material Safety 
Data Sheet-coveralls, gloves, safety 
footwear, glasses & respirator; follow 
safe manual handling techniques:-
don’t lift on your own if >20kg, bend 
knees & keep back straight.

Low

3. Mix chemicals (if applicable) & 
fill spray tank

As above; spray drift, 
chemical spillage, emission 
of  vapors  or  flammability; 
weather; untrained visitors

As above; user trained in the state’s 
chemical mixing & administration 
course eg Chem. Cert; follow the 
relevant Environment Protection 
Authority 

requirements; 

fire 

extinguisher present; keep visitors 
away from the job unless wearing full 
PPE.

Med

4. Use spray unit.

5. Clean up, maintenance & 
storage

As above; loss of load; 
heat & cold; noise; exceed 
load limit of vehicle; hose 
A As above; loss of load; 
heat & cold; noise; exceed 
load limit of vehicle; hose 
entanglement; exhaust 
fumes; terrain & slopes; run 
over by unit; exhaust fumes; 
terrain & slopes;

As above

As above; wear clothes to suit heat & 
cold; wear hearing protection if noise 
> 85 dBa; follow the manufacturer’s 
safe operation instruction for the 
vehicle and the spray unit; don’t 
overload - water weighs 1kg for every 
1 litre; secure load to vehicle; keep 
hose tidy; put unit brakes on.

As above; continue to wear PPE 
for clean up: store unit in a dry, well 
ventilated area.

High

Low

www.tti.com.au

Call 1800 816 277

Содержание SpotPro 220

















Отзывы: