7th press – Call Ringer Selection
8th press – Channel Memory
7) Built-in microphone
8) Built-in speaker
9) Desk top charger terminal
10) Scan / Lock button : Push this button momentarily to enable or
disable the scan. Press and hold this key for over 2 seconds to lock or
unlock keypad.
11) Power on/off button: Press and hold this key for over 2 seconds to
turn on or off the radio.
12) Memory button: Push this button momentarily to enable or disable
the stored channel.
13) Battery cover
14) Monitor : Press and hold this button for over 2 seconds to enable
the monitor function.
15) PTT switch : Push and hold to transmit ; release to receive.
16) Detachable belt clip
17) Fixed antenna
2. Battery Installation
Your radio equipment is designed to operate both in four “AAA” size
rechargeable Ni-MH battery (optional) or Alkaline batteries(not supplied).
Cautions
Never attempt to charge Alkaline or Dry Cell Batteries. When recharging the
rechargeable batteries, use only recommended ones. Use of other batteries may
cause damage to your radio equipment.
Installation of the batteries
*Ensure that the radio equipment sets to power off.
*Hold the radio and battery cover with the back facing you.
*Press and slide the battery cover.
*Install four “AAA” Ni-MH batteries or Alkaline batteries.
Note
: Carefully observe the polarity of the batteries before installing.
*Replace the cover
3. Basic Operation
In order to communicate with other PMR-446 units, both you and the
receiving party must be on the same channel. PMR-201TX has 8 channels
indicated by the large digits on the LCD display panel. Before trying to transmit on
the selected channel, you should press the Monitor Button to check the activity on
that channel. If someone is already on the selected channel, you should try another
channel that is clear.
7
