(14) Privacy Code Scan/Decode
This radio has Privacy code scan to determine which Privacy
Code (CTCSS) is in use on the current channel.
To activate the privacy code scan press the FUNCTION button
until the privacy code number flashes, then press the SCAN
button briefly. The Scan icon will appear when the privacy code
scan is active.
The radio will scan through the 38 privacy codes (CTCSS). If
your radio detects a valid signal the scan will pause for 5
seconds.
If you press the PTT or CALL button when your radio detects a
signal, the radio will transmit on the same privacy code.
Scanning will resume after approximately 15 seconds. Press the
UP or DOWN button to resume scanning immediately.
If you press the PTT or CALL button during scanning, the radio
will return to your original privacy code. Scanning will resume
after approximately 15 seconds.
The Function Menu and FM radio are disabled whilst scanning.
To increase battery life, use the scan mode sparingly.
(13) Channel Scan
The Channel Scan can be used to find or detect users on other
radio channels.
To activate/deactivate the channel scan, press the Power/Scan
button briefly. The Scan icon will appear when the channel scan
is active. Scanning will only stop when you deactivate the scan
function.
The radio will scan through the 8 channels. If your radio detects
a valid signal the scan will pause for 5 seconds.
If you press the PTT or CALL button when your radio detects a
signal, the radio will transmit on the same channel. Scanning
will resume after approximately 15 seconds. Press the UP or
DOWN button to resume scanning immediately.
If you press the PTT or CALL button during scanning, the radio
will return to your original channel. Scanning will resume after
approximately 15 seconds.
The Function Menu and FM radio are disabled whilst scanning.
To increase battery life, use the scan mode sparingly.
14
