TTI FLAT JACK, Руководство по установке

Страница: 17 / 30

4-3
Thompson Technology Industries, Inc.
4
. Si
te L
a
y
o
u
t P
rep
a
rat
io
n
Figure 4-1. Mounting Configuration A
If adjustability is necessary, an additional fastener can be
used anywhere along the slot.
Configuration B Description
In Configuration B, one fastener is used in the lower bolt
hole, and another is used anywhere in the bolt slot to
allow adjustability.
Figure 4-2. Mounting Configuration B
Configuration C Description
In Configuration C, a fastener must be mounted in the
bottom of the slot closest to the stud. A second fastener
must be mounted at the top of the slot to prevent
slipping over time. Configuration C allows all fasteners to
be installed underneath the flashing.
Figure 4-3. Mounting Configuration C