TTi’s
FirePatrol15
™
HandBook
5
Call 1800 816 277
www.tti.com.au
5
Operating Instructions
Before First Use
1. Check all hoses, connections and hose clamps to ensure that the unit has been
delivered to you without transportation loss or damage.
2. Before attempting any spraying with your new unit, operate it with water only
to familiarize yourself with its features and capabilities and to ensure that your
sprayer has arrived in a safe working condition. Please contact your dealer
immediately should anything appear to have been damaged.
3. Couple the unit to the towing vehicle by placing the tow hitch over the tow ball
of the vehicle. Ensure it locates correctly.
4. Plug the 7-pin trailer plug on to the plug of the towing vehicle ensuring that they
firmly lock. Test the brake lights and indicators.
5. Prepare the engine for use as per the engine manual supplies with your sprayer.
Ensure that the correct quantity and type of oil is used when filling the engine.
Operation
1. Fill tank from appropriate water source. Open ball valve on suction hose at
bottom of tank. Start motor and allow to warm up. Bypass valve is fitted to the
top of the pump and should be adjusted to allow bypass for warm-up period.
2. Unlock hose reel to allow hose to be pulled out. When using the fire fighter adjust
the nozzle to desired spray pattern. Increase engine speed and adjust bypass
to achieve desired flow rates. When job is finished turn engine off, rewind hose
onto reel and lock reel to prevent unwinding. Close ball valve on suction hose.
Please note that the unit is designed for fire fighting use and not for chemical
spraying. Please consult the manufacturer for further information.
