Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the PTT button
is released. This tone alerts the receiving party that the transmission has been
terminated intentionally.
To enable and disable the Roger Beep tone:
- From GMRS standby mode, press the MODE Button 7 times until
rb
appears on
the display with the flashing Roger Beep icon (
) and On or
oF
.
- Press the Up or Down Button to select the tone on or off as desired. When enabled,
the tone icon (
)appears steady on the display.
- Press the Power On/Oft button momentarily to confirm selection.
Call Ringer Selection Mode
The transceiver provides 5 user-selectable call ringer melodies to alert you to an
incoming call.
Jo select your favorite call ringer melody:
- From GMRS standby mode, press the MODE button 8 times;
CA
will appear on the
display, together with a flashing number be tween
1
and
5
, and an appropriate call
ring.
- Press the Up or Down Button to preview and hear the 5 available call melodies.
-
Press the Power On/Off button momentarily to confirm selection.
Refer to the PU button (4) to transmit ring signal.
Auto Key Lock Selection Mode
This feature prevents accidental channel change to the preferred settings of the unit.
The Auto key Lock function temporarily disables the Up, Down and Mode Buttons.
To access the Auto Key Lock selection menu:,
- From GMRS standby mode, press and hold the Scan Button for over 2 seconds to
Lock the Auto Key function; the ( ) icon appears on the display.
- The PTT and Monitor Buttons are not effected.
- To unlock the Auto key function press and hold the SCAN button for at least 2
seconds; the icon ( ) disappears from the display.
Emergency and Assistance Channel Mode
This radio has a quick access button (EMG) to the Emergency and Assistance Channel.
This channel is not monitored by local authorities. When using this channel,
EMG
appears on the display. Pressing this button will set the transceiver to the channel 10,
462~6750 MHz). The Emergency Channel can be used transmit and receive on a
special frequency (CH10: 462.6750 MHz).
The Emergency Channel can be selected quickly from any user mode. To access the
Emergency Channel mode,
-
Press Emergency (EMG) Button;
EMG
and Channel
10
appears on the display
-
To turn off the Emergency Channel feature, press and release the EMG Button.
