9
Fig. 9
SnapNType configuration screen
Fig. 10 A
ssigning applications screen
Enable
- tapping on this button will turn on the
SnapNType driver and allow the iPAQ to accept key
input from the keyboard.
Disable
- this will turn off the SnapNType driver.
Repeat rate
- this will determine the repeat frequency
of a key when you hold it down continuously.
Delay Until Repeat
- this will determine the delay from
your holding down a key to the key repeating.
Click Sound
- you can enable or disable 'key click'.
For this function to work properly, you need to first
turn on Hardware buttons sound in your iPAQ: tap
Start
, then
Settings
. Select
Sounds & Reminders
and
check the
Hardware buttons
box.
Close Software Keyboard
- The software keyboard
will be closed when key pressed. Un-check the box
to turn off this feature.
Test Area
- you can test your SnapNType by typing
in this area.
Assigning Quick Launcher
To combine with and any alphabet ( A-Z ),
you can launch different applications quickly .
Tap "
Options
" on SnapNType solfware to bring
out the assigning applications screen (see fig.
10). You can easily choose which program to
launch with each combination.