background image

  TT IP CAM User Manual                                                                                                             

http://www.ttipcam.com

 

                           

 

- 33 -

<3.2>Camera Name and Status 

 

 

 

Camera Name: 

IPcam(s) registered to this AccountID will display their names with current status on the 

list.  

Double click on any online IPcam’s name to see its streaming video on the display area.   

   

Status:

 Indicates the IPcam is online, working, recording or off-line.   

 

Click 

CAMERA 

to get to the page shown on the left side.   

   
 

CAMERA NAME

: The name user sets for the IPcam.   

 
   

IP UDP:

 The IP address and communication protocol.   

   

FPS: 

Frames-Per-Second  

   
 

BITRATE:

 Bits-Per-Second   

   

RESOLUTION: 

From D1 to QQVGA.   

Brightness, Contrast, Hue and Saturation are all adjustable to get the best output video.   

PTZ 

is only functional if the selected IPcam has PTZ function.   

   
Click 

PTZ

 and get a PTZ basic control page as like the one shown on the left side.   

<3.3> Color Adjustment 

 

Содержание IP Cam




















































































Отзывы: