TT Fuel TT8900 Скачать руководство пользователя страница 7

Страница: 7 / 41

TT8900 OPT

–

Installation and Service Manual

Page 7 of 41

Remote Monitoring and Management

Remote

Alarming

Internally generated alarms notified to central back-office server for

SMS / Email notification. Alarms, amongst others, include:

Emergency Stop activation, mains power failure, UPS battery state.

Low receipt paper, paper out

PIN Pad status (offline detection), pump offline, missed heartbeat.

Intrusion detection on access door.

Price change (pumps) confirmation, Price Sign change confirmation.

Tank level alarms low, low low, high, high high, leak (if ATG fitted).

Remote
Management

Remote management interface to central back-office server provides:

Transaction Management.

Inventory Management.

Event Analysis.

Scheduled Data Import / Export to third party packages.

Software upgrade.

Audit

Internal audit log which can be accessed by central back-office server for

post-analysis of events.

General Specifications

Environment

-10C to +50C with 95% non-condensing humidity. PIN Pad IP65, Card

Reader IP4X.

Electrical

230V AC 1A maximum - UPS and power filter included. All electrical
and communications connections protected by surge arrestors.

Security

Tower manufactured from powder-coated 304 stainless steel.

Option for 316 grade stainless steel tower for marine
environments.

Separate internal cabinet with 19mm aluminium fascia.

Controlled issue high security key system with master and site-
specific keys; Optional intrusion detection.

Physical

Dimensions

Height: 1804mm, Width: 655mm, Depth: 473mm.

Содержание TT8900










































Результаты поиска

Содержание TT8900

Отзывы:

Бренды по названию

Популярные бренды

TT Fuel TT8900, Инструкция по установке и обслуживанию

Результаты поиска

Содержание TT8900

Отзывы:

Бренды по названию

Популярные бренды