TSUNAMI-500 OPERATING AND MAINTENANCE
Page 8 of 9
Re-install the upper fiber filter frames by sliding the door hinges down on to the hinge
pins and turn the latch to secure the door.
3)
Water discharge hookup:
Attach one end of a hose to the discharge hookup on the T-500 and the other end to a
collection bladder or to a collection container preferred by the user.
4)
Power Shutdown:
Find On & Off switch located in the lower level on the right side of the power control box
behind the filter door. Move the switch down to the
“
Power Off
”
location. If using an
attachable power cord, remove the power cord from the power plug-in.
5)
Troubleshooting Guide:
A.
Once the power is turned on and the T-500 is running, make sure the circulation pump
is not running prior to the water storage tank filling up.
B.
Circulating fans should be running when the power switch is on.
C.
Exhaust fan should turn on once the compressor starts running.
