14 Performance and Specifications
68
14 Performance and Specifications
Power
AC 85V ~ 264V, 47 ~ 440Hz, 50VA
IN/OUT
Control motor
16 motors can be controlled
Capability
Local mode: controls 4 motor units at the
same time.
Remote mode: controls 16 motor units at the
same time.
Out put
CW, CCW, HOLE OFF (5V, 8mA: line
driven) for each 16 motor driver
Pulse rate
1 ~ 5MPPS
Pulse control number 0 ~
±
2,147,483,647
Acceleration and
deceleration rate
1048.56 ~ 0.0125 ms/kHz
Acceleration and
deceleration form
Constant speed, S-character form,
trapezoidal form
Output format
Pulse-Pulse, Pulse direction (Polarity of
direction can be switched.)
Pulse out connector
Dsub9S
Limit switch input
CW-LS, CCW-LS, HOME-LS 12V 5mA
(minus common) and power supply +12V
for censer for each motor (total 1A).
Limit switch
connector
Dsub9P
LCD display
Characters and lines
of display device
20charactors × 4 lines (Size : 9.2H ×4.8W)
Display contents in
control mode
channel number, current position of ±10
digit number, speed display, contents of limit
switch, relative moving value, preset count
value, home position information, panel
operation ready/not ready
Display contents in
data set mode
limit switch setting information, pulse
output mode, value of speed
HSPD/MSPD/LSPD, acceleration and
deceleration rate value, Push button stop
mode, origin detect function, timing pulse
generate function, RS232C settings, GP-IB
settings, HAND BOX selection,
FIRMWARE version selection
Remote control
Communication way
LAN, GP-IB, RS232C port
Case
EIA 2 UNIT rack mount t type (88H
×
482W
×
325D)
For the further information, feel free to ask us.
Tsuji-Electronics Co., Ltd
TEL: +81-(0)29-832-3031 FAX: +81-(0)29-832-2662
E-mail : [email protected]
URL : http://www.tsujicon.jp
3739, Kandatsu-machi, Tsuchiura-city, Ibaraki 300-0013, Japan
