1. Feature
N2VF-1H is the 100MHz 2CH V-F Converter that is housed in a NIM-1UNIT case. It has the four-levels
amplification factor switch and the polarity selector switch.
N2VF-1H is easy to be monitored.
i.e., the over-range and polarity are displayed on LED and also outputted as open-collector outputs.
Therefore, V-F conversion is always performed at the optimum conditions.
2. Specification
3. Before using
Before using, please power about 2 hours on for a warm-up.
The frequency deviation becomes large, if warm-up has not been made.
±0.01% FS
1MHz
10μs or less
BNC connector
LEMO connector (equivalent to EPL00250NTN)
Output Connector for Frequency
Over-Range output
NIM-1UNIT
Over-Range output Connector
Power supply
Case
Open collector (normaly close), isolated
BNC connector
+12V/200mA, +6V/600mA
Conversion Accuracy
Input Impedance
Inpur Sampling Frequency
Response
Input Connector
Output
TTL level
※ Please use 50Ω termination to reduce the reflected wave.
100MHz VF converter N2VF-1H
User's Manual [Rev.1]
Channels
Input Range
Output Range
2CH
-10V/-5V/-2.5V/-1V/+1V/+2.5V/+5V/+10V
100MHz/50MHz/25MHz/10MHz
1MΩ
Input
Single-end
Page 1 / 3
