2/12
Safety Guide and Warranty
WARNING
“Mechanical type Safety and Control devices”
⚫
Begin inspection and maintenance after verifying that no load or rotational force is being
applied to the equipment.
⚫
Check the operation of the device periodically so that it can be sure to function properly
when overload occurs.
“Electrical type Safety and Control devices”
⚫
When carrying out an operation test or making a periodic inspection, make sure to verify
that it functions properly as a protection device.
⚫
Follow the instruction manual when carrying out megger testing because most electrical
devices have certain requirements for megger testing.
⚫
Check the operation of the device periodically so that it can be sure to function properly
when overloaded occurs.
“Common”
⚫
Comply with the 2-1-
1 General Standard of “Ordinance on Labor Safety and Hygiene”.
⚫
When performing maintenance or inspections:
1)
Wear proper work clothes and protective equipment (safety devices, gloves, shoes, etc.).
To avoid an accident, make sure to perform maintenance and inspections in an
appropriate environment.
2)
Make sure the power is switched off, and the machine has stopped completely before
carrying out maintenance and inspections. Take the necessary measures to ensure the
power is not turned back on.
3)
Follow the instruction manual.
4)
Wire according to the technical standards of Electrical Installation and company
regulations. Take note of the cautions in this manual which explain installation
direction, clearance and environmental conditions. Make sure to ground the device to
prevent electrical shock and to improve noise resistance.
⚫
When using with lifting equipment, install a suitable protection device for safety purposes,
o
therwise an accident resulting in death, serious injury or damage to the equipment may
occur due to a falling accident.
Death or serious injury may result from product misuse due to not
following the instructions.
