2
・
Avoid contact with any rotating parts ( coupling, shaft, etc. ) during maintenance and inspection. Rotating
parts can catch approaching objects and cause serious injuries.
・
Make sure the power is switched off, and the machine is completely stopped before carrying out
maintenance and inspection.
Take caution so that the power does not reconnect accidentally.
Make sure the driving and driven equipment are also completely stopped.
CAUTION
(General)
・
Do not use coupling beyond its capacity as specified in the drawing. Exceeding its capacity can break the
machine and cause injuries.
・
Do not use damaged couplings. They can break your equipment and cause injuries.
(Transportation)
・
Pay extra attention so that the equipment will not fall or rollover during transportations.
(Installation)
・
Do not touch the edge and inner diameter of any part with bare hands to avoid possible injury.
・
Make sure to align the drive and driven shafts as instructed in the manual when installing the coupling
(Operation)
・
Do not touch the coupling during operation
ｓ
to avoid injuries.
・
Immediately stop the machine upon any sign of abnormal operation.
(Maintenance and inspection)
・
Wear appropriate clothing and safety gear (safety goggles, gloves, shoes, etc.).
・
Clean the surrounding area and maintain a clutter-free space to avoid secondary accidents.
・
Comply with Ordinance on Labor Safety and Hygiene 2-1-1 general standards.
・
Conduct periodic inspections to make sure that the drive and driven shafts are aligned as described in the
manual, and that the rubber and plastic parts are not worn or deformed.
(Environment)
・
Coupling scraps should be disposed as general waste by skilled professionals.
・
This coupling meets RoHS (Restriction of Certain Hazardous Substances) standards and contains no
hazardous chemicals.
