TSPROF K03 PRO, Руководство пользователя, Страница: 6 / 15

Your TSPROF K03 Pro device has a number of features:
◇ The abrasive holder with Axicube-i electronic angle finder allows you to monitor the sharpening angle in real time
and trace any changes, for example when changing the abrasive. Also it is possible to set the sharpening angle with
an accuracy of 0.1°. The display is easy to read in any lighting conditions. The angle sensor is resistant to vibrations..
◇ The abrasive holder guide rod is made of steel and allows the abrasives to be rigidly fixed both with and without a
blank. The abrasive holder bar has no angular deflection after assembly, both in free state and under load.
◇ The hinge unit, due to its advanced design, allows you to sharpen knives in the range of angles from 8°* to 39°
which allows you to sharpen at a total angle of up to 78°.
◇
The rack and pinion lift is made of aircraft-grade aluminum. It has a sharpening angle scale on it. The sliding part of
the lift is connected to the dovetail base. A locking screw prevents accidental movements of the lift. An additional
lifting rod is used to increase the sharpening angle. The device allows a two-step adjustment of the sharpening
angle: a coarse adjustment with the rack and pinion lift and a fine adjustment with the extended angle axis.
◇ The rotary unit has a unique mechanism that facilitates rotation and ensures reliable auto-locking of the clamping
frame. Thanks to the spring and bearing system, the frame rotates without wear to the mechanism. The auto-
rotation system body is made of durable aircraft-grade aluminum, anodized in black.
*when using fillet clamps
Option 1. Using the device without a stand.
◇
Glue the spacers from the spare parts package to the contact surfaces of the c-clamp.
◇
Glue the 5 bumpers from the spare parts package to the back of the body of the sharpener.
◇
Clamp the body to the table with the c-clamp.
Option 2. Using the device with a stand.
◇ Glue 5 bumpers from the spare parts package to the back of the stand.
◇ Place the body of the device in the recess of the stand and fix it with the thumbscrews.
5. PREPARING FOR WORK