installation
:
• Inspect the contents for any obvious physical damage. If damage has
occurred, contact the shipper of the hardware. If replacement part are
required.
• Some minimum clearances around the grow environment are required
for proper operation of the cooling system and to prevent over heating:
• The maximum ambient temperature of the grow environment opera-
tion is 0 to 40°C.
Ensure that the maximum ambient temperature is not exceeded. A
mechanical ventilation or cooling system is required to maintain
temperatures within the growing space below 104°F (40°C) when the
horticultural luminaire is in operation.
The Storage temperature range is -40°C to 70°C.
This unit is designed for damp locations.
Ceiling clearance: 2”
Fixture to fixture clearance: 2”
Fixture to wall clearance: 6”
Fixture to plants: 6”
Fixture to other objects: 6”
11
12
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE
WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED.
• Wiring must be in compliance with
horticultural, local, and national standards
and requirements. Before applying power
to the light fixture, verify that your product
is configured properly for your particular
application.
The Greenhouse Light Fixture is shipped
with a cord (whip) that is connected
internally to the fuxture. This cord is
equipped with M25-Nema 6-15P
For proper connection of a Fixture shipped
with a plug - ensure that the proper mating
receptable is available. Simply plug in
fixture to this receptacle.
• When wiring the light fixture, ensure the
following:
•
Power is disable when connecting cords
or plugs.
•
Power cords are not concealed or extended
through bulkheads, flooring, ceiling, or
other parts of the building structure.
•
Power cords are not located above the
ceiling (including dropped ceilings)
•
Power cords are not permanently attached
to the building structure.
•
Power cords are protected from physical
damage.
•
Power cords are not subjected to strain
and are bearing weight of the fixture
•
Power cords should be visible over the
entire cable length.
•
Power cords are used within their rated
ampacity as determined for the maximum
temperature of the installed environment
specified in the instructions.
DISCONNECT POWER BEFORE SERVICING. Hazardous
voltages may be present when covers are removed.
Qualified personnel must use extreme caution when
servicing this equipment.
WARNING
