P a g e
|
30
PAM2-3G16
User Handbook Issue 4
The
dBFS
parameter can be used to alter the 0dB reference level from between -12 and -24 dBFS.
The
Zero
parameter selects the offset level between the
Zero dBFS
setting and the onset of
Peak
indication (the point where the bargraph changes colour to red).
When set to
Block
mode, the
Peak
parameter enables the user to choose to illuminate the indication
between zero
dBFS
and the peak level in yellow.
The
Hold
parameter activates a peak hold indication when switched on.
2.12.2
Dolby E Video Delay
The
PAM2-3G16
features a
1 frame (40 ms) video delay
setting which can be inserted into the
Downconverted
video display to compensate for the latency caused by decoding a
Dolby E
signal. If
selected and activated, the delay will be switched into the video signal path automatically when a
Dolby E
input signal is detected and decoded. The
Video Confidence
window on
PAM2-3G16
will be
subject to a
1 frame delay
when the video delay mode is active.
