Page
12
of
41
PTP Setup and Status Information
1.
From the
SVIP Main Menu
, navigate to
Preset Setup.
2.
Push the rotary encoder to enter the
SVIP
Preset
Setup Menu
3.
Select and enter the
PTP Setup and Status
Menu
4.
Set the PTP Domain number for each SFP and apply
using the
TAKE
option
5.
With the correct PTP Domain number set and applied,
the PAM2-IP-3G will report one of the following
statuses for each SFP Module present.
•
Fine Locked
•
Coarse Locked
•
Not Locked
The MAC Address(es) of the PTP Source(s) are also
reported for each SFP Module present.
6.
Press the red button as shown on Page 8 of this Quick
Start Guide to exit the
PTP Setup and Status
Menu.
SVIP Preset Setup Menu
2022-6 Presets
2110 Presets
2110 Video Essence Setup
2110 Audio Essence Setup
2110 Ancillary Essence Setup
PTP Setup and Status
2110 Global Options Setup
PTP Setup and Status
SFP1 PTP MAC is D0:A4:B1:FF:FE:00:03B8
SFP1 PTP Fine Locked
SFP2 PTP MAC is D0:A4:B1:FF:FE:00:03B8
SFP2 PTP Fine Locked
SFP1 Domain:
SFP2 Domain:
UNDO
TAKE
0
UNDO
TAKE
0
SVIP Main Menu
Stream Config
Preset Setup
SVIP is selected as the Input Source
SFP1 Signal OK
–
active SFP
No Module Detected in SFP2
Statistics
Module Setup
Содержание PAM1-IP-3G
Страница 34: ...Page 34 of 41 PAGE INTENTIONALLY LEFT BLANK...
