TSL AMU2-BHD+, Руководство пользователя

Страница: 16 / 21

AMU2-BHD+-6 15 ISSUE 6
3.7
Configuration Switch Functions (from S/W Release X06)
A)
SWITCH SECTION FUNCTION
1 Not Used
2 Not Used
3 Speaker Mute Up
4 Digital Settings (see table below)
5 Digital Settings (see table below)
6 Digital Settings (see table below)
7 Not Used
8 Composite out-Up/SDI /Down
B)
SW4 SW5 SW6 FUNCTION
UP UP DN -24dBFS
DN UP DN -22dBFS
UP
DN DN -20dBFS
DN DN DN -18dBFS
UP UP UP
-15dBFS
DN UP UP TBD
UP DN UP TBD
DN DN
UP
TBD
4.0
LS Output
This is a bridged amplifier therefore neither terminal should be grounded.
5.0 Notes
0 dBm = 0.775V into 600
Ω
i.e. 1mW power dissipation.
0 dBu = 0.775V rms = PPM 4.
Nominally, -18 dB ref 0FS = 0 dBu output.
European line-up: -18 dBu
American line-up: -20 dBu
The LF Adjust potentiometer is non functional.
All audio monitoring Calibration procedures are factory Set.