TSL AMU2-8HD+, Руководство пользователя

Страница: 3 / 21

AMU2-8HD+/3G 2 Issue 1
SAFETY
Installation.
Unless otherwise stated TSL equipment may be installed at any angle or position within
an operating temperature range of 5
°
- 30
°
C .
All TSL equipment conforms to the EC Low Voltage Directive:
EC Low Voltage Directive (73/23/EEC)(OJ L76 26.3.73)(LVD).
Amendment: (93/68/EEC) (OJ L220 30.8.93).
The earth pin on the IEC mains inlet connector is connected to the metal frame of the
equipment, to 0 volts on the internal DC PSU and to signal ground, unless otherwise
stated. All metal panels are bonded together.
In all cases, the frame of the equipment must be earthed on installation.
Due consideration for cooling requirements must be given when mounting the equipment.
Ideally 1RU of rack space should be left above and below the unit.
Check that the fuse rating is correct for the local power (mains) supply. Replacement
fuses must be of the same rating and type for continued protection against fire risk.
Do not switch on until all connections are made.
WARRANTY, MAINTENANCE AND REPAIR
All TSL equipment is guaranteed for one year from the date of delivery to the customer’s
premises. If the equipment is to be stored for a significant period, please contact TSL
concerning a possible extended warranty period.
Failure during warranty
If any TSL product should fail or become faulty within the warranty period, first please
check the PSU fuses.
All maintenance work must be carried out by trained and competent personnel.
Technical support information
E-Mail address: support@televisionsystems.ltd.uk
Telephone Support Number for the UK and Europe: +44 (0) 1628 670000
Telephone Support Number for the USA only: 1 877 591 2108
USO
RESTRITO