TSL AMU1-CHD+MK2, Руководство пользователя

Страница: 3 / 16

AMU1-CHD+mk2 Issue 1
SAFETY
Installation.
Unless otherwise stated TSL equipment may be installed at any angle or position within an
operating temperature range of 5
°
- 30
°
C.
All TSL equipment conforms to the EC Low Voltage Directive:
EC Low Voltage Directive (73/23/EEC)(OJ L76 26.3.73)(LVD).
Amendment: (93/68/EEC) (OJ L220 30.8.93).
In all cases the chassis of the equipment must be earthed on installation
.
The external power supply provided with this product may be one of two types:
1. A Class 2 double insulated type with a ‘figure of eight’ mains input connector.
2. A Class or Level 3 type with an IEC mains input connector. This type offers a functional
earth and NOT A SAFETY EARTH via the earth pin of the IEC mains input connector to
the outer of the co axial power connector or the pin nearest the pip on the Lemo style
connector.
All metal panels are bonded together.
Check that the voltage selector setting (if fitted) and the fuse rating is correct for the local mains
supply.
Due consideration for cooling requirements must be given when mounting the equipment. It is
recommended that a 1RU of rack space, or a vent panel, should be left above and below the unit.
This unit requires rear support.
WARRANTY, MAINTENANCE AND REPAIR
All TSL equipment is guaranteed for one year from the date of delivery to the customer’s premises.
If the equipment is to be stored for a significant period, please contact TSL concerning a possible
extended warranty period.
Failure during warranty
If any TSL product should fail or become faulty within the warranty period, first please check the
PSU fuses.
All maintenance work must be carried out by trained and competent personnel.
If equipment has to be returned to TSL for repair or re-alignment, please observe the following
overleaf: