TSI Instruments SIDEPAK SP330, Руководство пользователя

Страница: 24 / 67

Chapter 2
16
Attach the battery cover by carefully placing it in the position shown.
Slide the cover forward, and under the lip on the instrument. Fasten it in
place with two screws.
Replacing the Cells in the AA Battery Pack
To replace the disposable cells in the AA battery pack, remove the
battery pack. Loosen the two side screws about half way. Slide the
cover back until it is free of the screws, then lift up and remove.
Open the battery pack. Remove the old batteries and dispose of them
according to local jurisdiction. It may be helpful to use the flat-bladed
screwdriver to gently pry up the positive (+) end of the battery cells.
Close the battery pack. Slide the battery pack into position placing the
tab in place first. Push the battery pack snuggly into position and secure
with the two screws on the sides.
Using the Power Supply
The power supply allows you to power the S
IDE
P
AK
™
pump from an
AC wall outlet, or to charge any of the TSI NiMH battery packs.
Connect the power supply to an AC wall outlet and plug the other end
into the power port on the side of the SP330 or SP350.
C a u t i o n
!
Many power supplies look alike. Make certain you are
using the proper power supply for the SP330 or SP350.
Using the wrong power supply may permanently damage
the instrument and void the warranty.