4 Getting Started
Turning on, Logging/Capture an Event, and Turning Off
Turning on, Logging/Capture an Event, and Turning Off
To quickly get you started with the QUESTemp
º
48N, the following section explains turning on
the instrument, data logging/event logging, and stopping.
1.
Press the
I/O Enter
key to turn on.
The first two start-up screens detail the name, type of instrument, and then a
revision and battery power screen appears. (Ensure the battery level does not fall
below 6.4V or you will want to replace the battery. See “Power options” for more
details.)
NOTE
: If you have data saved on the instrument, an additional screen stating “data
in memory” will appear prompting you to reset the instrument, if desired.
A
B
QUEST
QT-48N
WWB
REVISION
1.25
BATTERY
8.3V
Figure 1-3: Start-up screens (A – indicates model and type
B- indicates revision and battery power)
2.
In the
Index Start-Up
screen, press
I/O Enter
key.
NOTE
: If an index is selected from the Setup menu, this will appear on this screen.
Index: - - - -
<ENTER>
Figure 1-4: Index start-up screen
3.
A
Log Rate Start-Up
screen will appear, press
I/O Enter
key. (This screen details your
log rate time or event logging setup option and the last saved logged session or event.)
(See Setup for more information on event logging.)
Log Rate:
1 min
Nxt 01 <ENTER>
Figure 1-5: Log rate start-up screen
