Set-Up
7
2
Lift the top of the fabric. Insert one end of a support pole into its
pole mount in the base of the AccuBalance
®
capture hood.
There is a cup in each corner of the frame to accept the other
end of each support pole. Helpful Hint: This step is made simpler
by temporarily resting the opposite corner of the fabric top on a
table edge.
3
Grasp the support pole. Bend the pole slightly to insert the top
end of the pole into the support pole cup located in the corner of
the fabric frame as shown in Figure 5.
Figure 5: Installing a Support Pole
4
Insert the second support pole into the pole mount on the
opposite side of the AccuBalance
®
capture hood base.
5
Repeat step 3 for the second support pole.
6
Repeat steps 4 and 5 for the remaining two support poles.
Rod to pole
cup
