TSI Instruments 3760, Инструкция по эксплуатации, Страница: 8 / 22

1 Introduction
1–1
The Model 3760 Condensation Nucleus Counter (CNC) operates with the
multisensor Cleanroom Monitoring System (CRMS) using the Model 3701
Multiplexer/Processor or the Model 3704 Single-Channel Processor in conjunction
with an IBM personal computer.
Refer to the CRMS Instruction Manual (P/N 1933700) and the CRMS Advanced
Software Instruction Manual (P/N 930037) for detailed information about the
complete monitoring system. Much of the information in these manuals that
applies to the Model 3755 Laser Particle Counter applies to the CNC as well.
Figure 1-1
TSI Model 3760 Condensation Nucleus Counter
Important Information:
Laser Warnings The CPC is a laser-based instrument. As such, certain precautions must be taken
when using and servicing it. Do not remove any parts unless instructed to do so in
this instruction manual—otherwise you may expose yourself to hazardous optical
radiation.
WARNING : The use of controls, adjustments, or procedures other than
those specified within this manual may result in exposure to
hazardous optical radiation.
Several advisory labels are attached to the components of the counter for your
benefit (see figure 1-2). Reproductions of them, and a note on their locations, are
given below.