TSI Incorporated 4140, Руководство по эксплуатации и обслуживанию

Страница: 13 / 26

Setting Up 5
Table 4. Changeable Operating Parameters
Function Command
Select Gas Calibration air, O
2
, N
2
, or N
2
O(if available) SGn
Select Standard or Volumetric Flow Measurement SUn
LCD Display Update Rate (controls averaging) SURnnnn
Select Measurement Display Scroll Mode SDMFTPn
Select Measurement Displayed on LCD Display SDMm
Select Measurement Units on LCD Display SDUn
Select Data Update Rate for Analog Output SSRnnnn
Set Analog Output Full-Scale Flow Rate Value SASnnn
Set Analog Output Zero Value SAZnnn
Configuration Software
TSI has several software utilities to help you communicate with your
flowmeter to change parameters and to obtain flow data. You can
download the latest versions of these at no charge from our web site:
http://flowmeters.tsi.com
1. If you only want to change one or more of the operating
parameters shown in Table 4 (above), the easiest way is to use
the software utility called
“TSI setup.”
This uses convenient drop-
down menus to help change these parameters. After you have
made your changes, be sure to click on “Send” to store the
changes in the flowmeter’s memory.