17
3.
Adjust the label guide to fit the width of the media.
4.
Engage the printer carriage.
N/A
5.
Wind the label roll until it becomes adequately taut.
6.
Close the printer cover and press the
FEED
button
three or four times until the green
ON-LINE
indicator illuminates.
7.
When the printer is out of ribbon or media, the
ON-
LINE
LED will not illuminate and the
ERR.
LED will
flash. Reload the ribbon or media without turning
off the printer power. Press the
FEED
button three
or four times until the
ON-LINE
LED illuminates.
The printing job will be resumed without data loss.
Содержание TTP-244 Pro Series
Страница 40: ...36 9 Revise History Date Content Editor ...
Страница 41: ......
