31
3.1.1-1.1 Speed:
Use this option to setup print speed. The each increament/decreament is 1 ips.
Press
key to raise the print speed, and press
key to decrease
print speed. Press
key to set it into printer. Press
key to
cancel the setting and return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send
out the SPEED command, which will overwrite the setting set from the
front panel.
3.1.1-1.2 Density:
Use this option to setup printing darkness. The available setting is from 0 to 15, and
the step is 1. Printer default density is 8.You may need to adjust your density based
on selected media.
Press
and
to increase/decrease the printing darkness. Press
key to enable the setting. Press
key to cancel the setting and
return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send
out the DENSITY command, which will overwrite the setting set from
the front panel.
3.1.1-1.3 Direction:
The direction setting value is either 1 or 0. Use this option to setup the printout
direction. Printer default printout direction is DIRECTION 0.
Press
key to set the direction as 1, and
to set it as 0, and
key to enable the setting. Press
key to cancel the setting and
Print Setup 1/12
>
Speed
Density
Direction
Speed
6
Print Setup 2/12
Speed
>
Density
Direction
Density
8
Print Setup 3/12
Speed
Density
>
Direction
Direction
0
Содержание TTP-2410M
Страница 15: ...12 z Loading path for ribbon ...
Страница 21: ...18 ...
