TSC Printronix TTP-286MT, Руководство пользователя

Страница: 38 / 59

33
Note: If printing from enclosed software/driver, the software/driver will send out the commands, which will overwrite the settings set
from the panel.
Item Description Default
Speed Set the print speed. Setting range: 2~14 for 203dpi; 2~12 for 300dpi; 1~6 for 600dpi 6
Density
Set the printing darkness.
8
Direction
Set the printout direction. Setting Value: 0 and 1.
Direction 0: Direction 1:
0
Print mode
Set the print mode. There are 5 modes in total:
None: Next label top of form is aligned to the print head burn line location. (Tear Off Mode)
Batch Mode: Once finishing the printing process, label will be fed to the tear plate location.
Peeler Mode: Enable the label peel off mode.
Cutter Mode : Enable the label cutter mode.
Cutter Batch: Cut the label once at the end of the printing job.
Batch Mode
Offset Adjust media stop location. Available value setting range: -999 dots to 999 dots. 0 dot
Shift X
Adjust print position. Available value setting range: -999 dots to 999 dots.
0 dot
Shift Y 0 dot
Reference X
Set the origin of printer coordinate system horizontally and vertically. Available setting range: 0 dot to 999
dots.
0 dot
Reference Y 0 dot
Code page
Set the code page of international character set.
850
Country Set the country code. Available setting value range: 1 to 358. 001