TS-market PAPYRUS-III, Руководство пользователя

Страница: 13 / 56

2 PREPARATION PROCEDURES AND OPERATION
ORDER
2.1 Battery Charging
2.1.1 The internal battery of the device can either be charged via
the USB port of the computer or the mains line of 220 V using charger
included in the set or by use of vehicle electrical network (12V). The
color of battery LED indicator (Picture 1) changes from red (battery is
empty) to green (battery is charged) throughout the charging process. The
total charging time is no longer than five hours.
2.1.2 For built-in battery charging from USB port the PC connect
the device as given in part 2.3 of UM.
2.1.3 For built-in battery charging from 220 V mains line connect
the micro USB - USB cable from the set to the micro -USB port of the
device (point 1 on Picture 2) and to the USB port of the Charger.
2.1.4 For built-in battery charging from a vehicle electrical network
connect the micro USB - USB cable from the set to the micro-USB port
of the device (feature 1 on Picture 2) and to the USB port of the Vehicle
charger 12 V connected to the vehicle electrical network.
2.2 Software installation
2.2.1 Place USB flash drive with software («Papyrus Tool») from
the package (Table 2) to USB port of the PC. Launch «setup.exe» file
located on the USB flash drive for «Papyrus Tooll» software installation.
ATTENTION! Disconnect the device from the computer before
«Papyrus Tool» installation.
13