5
Installing the Battery and Memory Card
Install memory card into the compartment as
shown in the scheme. The Recorder operates
under CR 2450 batteries. Open the Lid of
the battery compartment, insert the battery
observing the polarity (the positive battery contact
is to be upward) and install the Lid up to the
stop. Carefully observe the polarity! Otherwise
the Recorder may malfunction. After the battery
has been installed the Recorder carries
out automatic self-testing signifying it by three
flashes of LED. After that the Recorder is ready
to start operating.
Starting the Recording
To start recording switch “Rec-Stop” switch
to “Rec” position. When the recorder starts
recording, the LED flashes five times.
After that there will be one more flash its duration
depending on free memory size (for more
details see Instructions in the internal memory
of the Recorder). To stop recording switch
“Rec-Stop” to “Stop” position.
