Rotation speed under no-load conditions
Supply voltage
Chuck inner diameter
Rechargeable battery
Li-ion (model)
Rated voltage
Electric capacity
Charging time
Battery weight
B
attery charger
(model)
Mains voltage
Output current
Gear shifter
I-II
Acoustic pressure level
(LpA)
Acoustic power
(LwA)
Vibration level according to: EN 60745-2-1/A11:07
(t
olerance of measurements
: K=1,5 m/s²)a
h,d
Maximum torque
(
Gear
I/II)
Maximum drilling
diameter
Wood
Steel
Weight
(with battery)
5
Using the charger:
a)
Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
b)
The supplied charger should only be used for charging
batteries that are supplied together with it.
Charging other
n
batteries may cause breaking and disintegration of the battery, bodily
harm, or fire.
c)
Do not disassemble the charger.
d)
The charger is designed exclusively for indoor use.
It must not
be exposed to water or moisture.
n
e)
Charge only in an ambient temperature between 15-25
Fig.A
1.
Keyless chuck
degrees.
2.
Clutch control knob
f)
Do not insert metal objects of any kind into the charger.
3.
Gear shifter
4.
Rotation direction switch
The device is dedicated to drive in and out screws, drilling boreholes in
5.
Handle
such materials as steel, wood, plastics, etc. The combo drill and
6.
screwdriver is designed exclusively for DIY applications
.
7.
Battery
8.
Battery lock clip
device
9.
Battery indicator to show the battery status of charge
10.
On/off switch
11.
Auxiliary lighting
Fig.C
Fig.E
Fig.G
- Touching the rotating drill bit with the hand
operator's clothes
.
- Burns when changing drill bits (Drill bits heat up intensely during
operation; use protective gloves when changing the drill bit).
- Throwing back machined object or its fragment.
- Bending/breaking the drill.
The set includes:
Device components
(see
page 2
)
APPLICATIONS AND CONSTRUCTION:
Despite using the tool according to its intended application it is
impossible to eliminate certain residual risk factors. Considering the tool
construction the following risks may occur when operating the tool:
or
The set consists of a drill with a chuck, batteries - 2 pcs, charger and 13
accessories: a magnetic tip for bits with a 1/4" holder, bits - 6 pcs (P
H
1,
P
H
2, PZ1, PZ2, SL 5, SL 6) and drill bits - 6 pcs (1.5, 2.5, 3, 4, 5, 6 mm).
The tool must not be used for work requiring a professional tool.
Any use of the
that is not in observance with the above-
mentioned purpose is forbidden, leads to the loss of warranty, and
relieves the manufacturer from responsibility for the resulting damage.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
Bit insert
12.
Charger
13.
Clutch setting indicator
14.
Drilling setting pictogram
15.
Left-threaded fixing screw
MODEL
TXV14LK2
TXV18LK2
14,4 V
18 V
yes
yes
-1
-1
Gear I
: 0-400 min ;
Gear I
i: 0-1250 min
13 mm
14,4 V
18 V
1 h
1,5 Ah
100-240V; 50-60 Hz; 1,2A
2
<2,5 m/s
72 dB(A)
83 dB(A)
TECHNICAL DATA
0,32 kg
0,37 kg
10,8-18Vd.c. 1,5 A
30/13 Nm
25/12 Nm
25
mm
13
mm
30
mm
13
mm
2,35 kg
2,45 kg
YTXV14AK
YTXV18AK
YYTXV1LD
YYTXV2LD
