Tryton THP1800, Инструкция по эксплуатации

Страница: 7 / 56

7
Also, the applicable occupational health and safety regulations 13. Blade fixing screw
concerning accident prevention must be strictly observed. 14. Washer
15. Outer clamping flange REMARK: Do not expose electric tools to rain or moisture.
16. Saw blade moving guard: - open position (fig. A ),
Any use of the saw that is not in observance with the above-mentioned
- closed position (fig. B )
purpose is forbidden, leads to the loss of warranty, and relieves the
Fig. B: 17. Spindle lock lever
manufacturer from responsibility for the resulting damage.
18. Switch
Any modifications of the tool by the user relieve the manufacturer from
19. Safety pushbutto n
responsibility for any damage and injuries to the user and the
surroundings.
20. Cut depth scale
21. Cut depth adjustment lever
Proper use of the saw also pertains to maintenance, storage, transport,
22. Cord and repairs.
23. Hex key
The saw must only be repaired in service points designated by the
Fig. C 24. Inner clamping flange
manufacturer. Electric tools supplied from the mains must be repaired by
properly authorized persons.
This is a multi-purpose manually guided tool with compact, ergonomic
design. It allows users to adjust the cutting depth and adapt the tool to
Proper use cannot guarantee that no residual risk will occur. Due to the
material thickness as well as to cut at a specified angle to the material design of the machine, the following risks may occur:
surface (cutting plane is non-perpendicular to the material surface).
ź
the operator may touch the saw blade in the unguarded part of the
The tool provides safety thanks to the construction of self-adjusting saw;
cutting disk guard that automatically retracts during cutting process.
ź
the operator may touch the saw blade while it is moving (which will
The machine structure provides users also with easy-to-use buttons, result in a cut);
locks and handles that are responsible for specific functions and
ź
the workpiece or its part may be thrown away by the saw;
maintenance/operation features.
ź
the blade may crack/break;
ź
the operator may suffer a hearing injury due to the failure to use the
TECHNICAL DATA :
required hearing protection equipment;
ź
the operator may inhale the harmful wood dust while performing
work in closed premises.
The tool is not intended for professional or industrial use. The
guarantee will become void if the tool is used in professional
workshops, industrial plants, or for similar activities.
COMPONENTS:
ź
C ircular saw – 1 pc
ź
Rip fence – 1 pc
ź
Blade, Ø 210 x Ø 30 x 24T – 1 pc
ź
H ex key - 1 pc
ź
C arbon brush – 2 pc
ź
pc
pc
MACHINE STRUCTURE :
The circular saw is a tool in protection Class II (double insulation)
and it is powered with a single-phase motor.
Its structure is shown in the pictures on the pages 2-3:
Fig. A: 1. Saw dust ejection
The vibration level value given refers to basic application of the tool. If the
2. Grip
tool is used for other applications or with other tools, or if it is not
3. Saw blade guard grip
maintained properly, the vibration level may differ from the values
4. Ancillary grip
given. The above-mentioned causes may lead to higher exposure to
5. Bevel angle scale
vibrations during the whole work time.
6. Cut angle adjustment lever
One must implement additional safety measures to protect the operators
7. Rip fence adjustment screw
from exposure to vibrations, such as maintenance of the electric tool and
8. Saw foot
work tools, assurance of proper hand temperature, or determination of
o o
9. Marks indicating the line of cut with the foot set at 0 and 45
the sequence of work operations.
angle
10. Arrows showing the blade rotation direction
HOW TO OPERATE THE TOOL :
11. Rip fence
1. Before you start working check the cutting disk condition to avoid
12. Blade overload and improper tool operation.
Instruction manual - 1
ź
Warranty card - 1
Rated voltage
230-240 V
Rated frequency
50 Hz
Power consumption
1800 W
Rotational speed max. 5300 rpm
Saw blade diameter, max.
210 mm ø
Cutting depth 0 º/45º 75 mm/50mm
Cutting angle o o 0 45 ~
Saw blade diameter inner
Vibration level acc. to:
EN 60745-1
2
1,911 m/s
Measurement tolerance
2
K (m/s )
2
1,5 m/s
Weight
5,3 kg
Protection class II
Sound pressure level (LpA) 93,5 dB(A)
Sound power level (LwA) 104,5 dB(A)
ø 30 mm
M ain g rip
Ancillary grip
2
1,224 m/s
Measurement tolerance K (dB(A)) 3 dB(A)