Tryton TDS230, Руководство по эксплуатации

Страница: 7 / 60

7
Angle Grinder , Safety Warnings
Personal safety:
a) Release the On/Off switch and set it to the off position when
the power supply is interrupted, e. g., in case of a power failure
or when the mains plug is pulled.
This prevents uncontrolled
restarting.
THE SET CONTAINS:
b) When working stone, use dust extraction. The vacuum cleaner
ź
Grinder - 1 piece
must be approved for the extraction of stone dust. Using this
ź
Disk guard - 1 piece equipment reduces dust-related hazards.
ź
Side handle -1 piece
c) Use a cutting guide when cutting stone. Without sideward
guidance, the cutting disc can jam and cause kickback.
ź
Fixing flange -1 piece
ź
Compression nut -1 piece
d) When working with the machine, always hold it firmly with
both hands and provide for a secure stance.
The power tool is
ź
Pin wrench -1 piece
guided more secure with both hands.
ź
-1 piece
e) Secure the workpiece. A workpiece clamped with clamping devices or
ź
Warranty card -1 piece
in a vice is held more secure than by hand.
DRAWING DESCRIPTION (see p. 2-3 ) :
f) Never use the machine with a damaged cable. Do not touch
1. Side handle
the damaged cable and pull the mains plug when the cable is
2. Disk guard
damaged while working. Damaged cables increase the risk of an
3. Compression nut
electric shock .
4. Fixing flange
CONSTRUCTION AND APPLICATIONS OF THE GRINDER :
5. Guard lock
The angle grinder is a hand power tool powered by a single-phase
6. Rotation direction arrow
commutator-based electric motor. It comes with a side handle to be
7 . Spindle lock button
mounted in three optional positions.
8. Handle unlocking button
The tool is a Class 2 device (double insulation).
9 . Main handle
The grinder is designed for grinding and cutting metal objects, machining
10 . Power cord weld joints and, by using special tool bits (disks, brushes etc.), to remove
rust and polish metal surfaces.
11. On/off switch
The tool is not suitable to machine plaster surfaces or other strong dust-
12. Locking lever
producing materials. Small dust particles by penetrating into the tool block
1 3 . Spindle
ventilation spaces, which results in overheating and burning the motor.
1 4 . Disk
This electric tool is designed for jobs with medium intensity. It is not
1 5 . Pin wrench
suitable for long-term operation under heavy duty conditions. Do never
use the tool for applications that need use of professional TECHNICAL DATA:
equipment.
accessories;
- Throwing a machined part or pieces of a machined part ;
- Fracture /cracking of the working accessory;
- Damage of hearing when appropriate hearing protectors are not used
;
- Emission dust hazardous for human health when works are carried out
in closed rooms (confined areas).
O perating instruction
Each application of the tool not in line with the intended use as specified
below is strictly forbidden and makes the warranty terms null and void. The
manufacturer shall not be held responsible for possible consequential
damage that may arise due to or in connection with such application.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
Application of the tool in accordance with the intended use also refers to its
maintenance, storage, transportation and repairs.
Defective electric tools can be handed over for repairs exclusively to service
workshops appointed by the tool manufacturer. The tools supplied from
electric grid shall be repaired exclusively by authorized electricians.
Proper use cannot guarantee that no residual risk will occur. Due to the
design of the machine, the following risks may occur:
- Touching of the working accessory during its operation within the
unshielded area of the tool ;
- Scalding while the working accessory is being replaced (During its The vibration level value given refers to basic application of the tool. If the
operation the working accessories are getting extremely hot. To avoid tool is used for other applications or with other tools, or if it is not
scalding operators must wear protecting gloves to replace the working maintained properly, the vibration level may differ from the values given.
Rated voltage -240 2 2 0 V
Rated frequency 50 Hz
Power consumption 235 0 W
Speed 6500 rpm
Max . disk diameter/ hole diameter 230 mm / 22 mm
Spindle thread M14
Equipment class
Power cord length 3 m
Weight 4,3 к g
Sound pressure level (LpA) dB(A) 98,1
Sound power level (LwA) 109,1 dB(A)
Vibration level according to EN 60745-1 ,
m ain handle a / s ide handle a
h, AG h, AG
5,73 /
2
5,17 m/s
2
( measuring tolerance K=1,5m/s )
II /
M easuring tolerance K / K
LpA LwA
3 dB(A)