Nova Motion/Tall/Connect-O Assembly Instructions
–
Rev A
Page 7
•
Insert one (1) of the smaller Allen L-Keys behind the top of
the channel cover to pull out of the pole. Reinstall covers
after the power cords are in place.
Note: Channel Cover Strips will need to be adjusted if
accessories are installed.
5.
EXTENSION POLE INSTALLATION
•
On the Nova Connect, shown below left, assemble the
extension pole to the offset adapter with the two (2)
screws (1”) using the 3/16” Allen
L-Key.
•
On the Nova Tall, shown below right, assemble with one
(1) screw using Torx Security L-Key provided in hardware
pack.
4.
REMOVING THE CHANNEL STRIPS
