Trynex SnowEx SP-9500, Руководство владельца/оператора, Страница: 28 / 40

© Trynex International 2009 L1185 5 — 28
Operating the Spreader
(continued)
BAFFLE INSTRUCTIONS
• The V-Maxx 9500 uses a dual baffle design over the auger area.
This baffle (D6889) is used for dry bulk materials. The baffle is
designed to reduce the risk of leakage with clean/dry free-flowing
materials. If the material you are using is damp/wet, you may need
to remove baffle (D6889). This will allow for more un-restricted flow
of materials and possible bridging.
• WARNING: Always disconnect power source before attempting to
remove material baffle.
• The main baffle assembly (D 6888)
MUST never be removed from
its original factory installed position unless the unit is being serviced
or for installing the Optimum flow Kit.
Model # SP-9500
D6889