Trynex International TurfEx TS45, Руководство пользователя

Страница: 19 / 28

19 © TrynEx International 2014 F51509 REV-A140506
Assembly Instructions
A: Assemble the Upper Handles by using one Hex Bolt M6x50, Flat Washer Ø6 and Lock Nut M6 to put the Handle Spacer between two Upper
Handles at the hole closest to the handle grips.
B: Use two sets of Hex Bolt M6x50, Flat Washer Ø6 and Lock Nut M6 to assemble the Upper Handles together and fix the Gate Lever on
Upper Handle.
C: Tighten all the fasteners in this step.
A: Push the Gate Lever forward to the lowest position and insert the upper end of Gate Rod into the slot of the Gate Lever.
B: Remove one nut from the Gate Rod and insert the rod to Pivot & Bracket Assembly and tighten on the removed nut again.
STEP 7: INSTALLING GATE LEVER AND HANDLE
STEP 8: INSTALLING GATE ROD