17
User may back to the Windows screen and Click Start – Program file – Bluetooth – Bluetooth
setting to start the second TRP-C51 installation. The number of TRP-C51 that a Host system
may install is depended on the COM Port number that the system or OS can offer.
5-2. Paired mode
TRP-C51 paired mode allows user to make a wireless connection between 2 RS-232/422/485
devices or PLC (Programmable Logic Controller)
without hardware or software changes. In this
mode the data line signal and data format can be auto detected and converted between each
other. The communicating range can up to 100M.
4-3. How to set up TRP-C51 paired connection mode
Step.1
: Use TRP-BT utility to set one TRP-C51 as master, and another TRP-C51 as slave. Both
TRP-C51 devices name and password must be same.
Step.2
: Put both TRP-C51 in system connection and power on, the both TRP-C51 LINK LED
start to blinking that means they are in searching each other status.
Step.3
: When both units LINK LED become constant lighting, both TRPC51 had been
successfully connected each other, the system is ready and workable.
