3-1-1.TRP-C08S Device Installation & Detection:
Connect TRP-C08S to the USB Host controller of the PC using a USB cable. The first time you
plug-in the cable into the USB port, Windows will start installing the device driver software. You
can see the installation status at the pop-up message of system tray. After installation, the pop-up
message says
“Your devices are ready to use”, Device driver software installed successfully
.
TRP-C08S device detection can be confirmed by checking at the Device manager. Check for
“
MosChip High-Speed USB MultiSerial Compound Device
” under
Universal Serial Bus controllers
and you will find “
MosChip High-Speed USB Serial Port (ComX)
” under the category
Ports (COM &
LPT)
. Here ‘X’ in ‘ComX’ represents the serial port number. You can see the same in the figure
below.