ECHIPAMENTE PENTRU AUTOMATIZĂRI
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583
cele mai sensibile
2
1. Introduction
The TRP-C08 allows you to connect your serial devices to systems by using a USB
interface. With auto configuration in data format, baud rate and RS485 data flow direction control.
TRP-C08 is able to automatically configure RS-232, RS-422 or RS-485 signals to baud rate
without external switch setting. TRP-C08 is equipped with 3000V DC of isolation and internal
surge-protection on each data lines to protect the host computer and converter against high
voltage spikes, as well as ground potential difference. TRP-C08 also features a high-speed 256
Kb/s transmission rate, and supports various O.S. The industry DIN rail and panel mounting
design enable user a fast and professional installation.
1-1. Features
¾
Full compliance with the USB V1.0 and 2.0 specification.
¾
System gets 1 COM port when the converter is connected.
¾
Auto data format detecting.
¾
Auto direction flow control on RS-485.
¾
Auto baud rate switching from 300bps to 115.2 Kbps.
¾
256 byte buffer for upstream and downstream data flow.
¾
Direct power from USB port , no external power necessary.
¾
3000V DC isolated protection.
¾
Surge protection on RS-422/485 data lines.
¾
Power/TX/RX mode LED indicator.
¾
DIN rail or panel mount support.
¾
Driver support: Windows 98/ME/2000/XP/CE3.0, and Linux, and Mac OS.
1-2. Specifications
¾
USB interface: Fully compliant with V1.0, 2.0 specification.
¾
USB to serial bridge controller; Prolific PL2303HX.
¾
RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).
¾
RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).
¾
RS-485 signal: Differential 2 half-duplex wires (D+, D-).
¾
Data Format: Asynchronous data with all common combination of bits, parity, stop.
¾
Parity type: None, odd, even mark, space.
¾
Data bit: 5, 6, 7, 8.
¾
Stop bits: 1, 1.5, 2.
¾
Cable: USB type A to type B.
¾
Communication speed: form 300bps to 256Kbps.
¾
RS-422/485 line protection: Against surge, short circuit, and voltage peak.
¾
Transmission distance: RS422/485 Up to 4000ft (1200M).
¾
Connection type: Screw terminal accepts AWG #12~30 wires.
¾
Signal LED: Power on, TX, RX.
¾
Direct power from USB port.
¾
Power consumption: 1.2W.
