cover
side rail
inside box rail
side rail
header seal on
top of rail
approx
8
”
LOWER CLAMp
Passenger
’
s
Side Rail
Header Guide
Bracket
Spring Plunger
Safety Straps
sTEp 1:
Place front of side rails against front of truck box, flush with
box rail and level with each other. Starting at tailgate, evenly
space 3 clamps along each side rail, leaving approximately 8
”
on each end.
sTEp 2:
For optimum latching performance and cover fit, side rails
must be level. To adjust rails, loosen screws and reposition
male clamps higher or lower. Tighten all clamps.
sTEp 4:
Retract spring loaded header guides. Align header with side
rail and release header guides for automatic engagement with
side rail. Check to assure header guides are fully engaged
with side rail.
sTEp 3:
Set cover assembly behind cab with header seal on top of
rail.
sIDE RAIL & COvER INsTALLATION
Driver
’
s
Side Rail
Cover
Assembly
Rubber
Seal
End
Plug
OUTWARD TILT
Note:
High Bed Caps: You may need to adjust the height of
the side rails to get a good seal at front and back of cover.
box
rail
froNt of
truck box
bottom
View
fro
Nt of
truck box
clamP
assembly
teNsioN
coNtrol
cover
assembly
side
rail
flange
header
guide
retract
align
side
rail
Tighten clamps securely on side
rails before driving vehicle.
WARNINg
!
release
header
guide
clamp
assembly
CORRECT
RAIsE CLAMp
LEvEL
INWARD TILT
Note:
Clamp configurations shown are for reference only and
are not intended to be standard for all pickups.
