TruVision TVR-40 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 66

background image

HD-TVI DVR User Manual

52

Appendix A FAQ

Q1. Why the DVR doesn’t turn on after connecting to the power?

a.

The power adapter could have gone bad. Please change a new power adapter.

b.

The power from the adapter may be not enough for operating the DVR. Please use the
power adaptor supplied along with the DVR.

c.

It could be a hardware problem.

Q2. The DVR LED turns on but there is no output, why?

a.

The power from the adapter may be not enough for operating the DVR. Please use the
power adaptor supplied along with the DVR.

b.

It could be a wiring issue. Please check the connection for the same.

c.

Check the monitor settings.

Q3. Why are no images displayed on few or all channels of the DVR?

a.

It could be a wiring issue. Please check the cable and the ports of the cameras and DVR.

b.

The problem can also be related to cameras. Please check the same.

c.

Please make sure that the channels are not programmed as hidden channels and check the
status from admin login.

Q4. The HDD cannot be found.

a.

The power from the adapter may be not enough for operating the DVR. Please use the
power adaptor supplied along with the DVR.

b.

It could be wiring issue. Please check the power and data cables of the HDD.

c.

The HDD could have gone bad. Change a new one.

Q5. The DVR cannot record.

a.

Make sure the HDD was formatted prior to use.

b.

Maybe the user hasn’t enabled the record function or has done incorrect setup. Please
refer to Chapter 5.

c.

Maybe HDD is full and thus the DVR is not able to record. Check HDD information
from Disk Management and if required, please enable the recycle function.

d.

The HDD could have gone bad. Please change another one.

Q6. Mouse doesn’t work.

a. The mouse should be connected to the USB port at the rear side.
b. After connecting the mouse, allow the DVR to detect the mouse for seconds. If not detected,
try restarting the DVR.
c. The mouse may be incompatible. Please change a mouse.

Q7. ActiveX control cannot be downloaded.

«
...
55
56
57
58
59
...
»

Содержание TVR-40



































































Отзывы:

Нет отзывов

Похожие инструкции для TVR-40

Бренд: Ganz Страницы: 2

Бренд: Elmo Страницы: 2

Бренд: ACTi Страницы: 13

Бренд: ACTi Страницы: 15

Бренд: ACTi Страницы: 121

Бренд: EverFocus Страницы: 2

Бренд: EverFocus Страницы: 68

Бренд: EverFocus Страницы: 128

Бренд: EverFocus Страницы: 147

Бренд: Velleman Страницы: 41

Бренд: Chipatronic Страницы: 16

Бренд: 4Kam Страницы: 20

Бренд: Ness Страницы: 68

Бренд: Ness Страницы: 43

Ultimate Series

Бренд: Ness Страницы: 58

Eagle-04 Series

Бренд: ClearView Страницы: 267

Бренд: Abus Страницы: 8

SAGA "ST" Series

Бренд: Vitek Страницы: 180

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды