P/N 1073419-EN
• REV
E
• ISS
05JUL21
3
Please refer to the camera mounts guide to verify if an adapter plate
is needed and included with your camera.
•
Adapter plate mounting screws
To mount a dome camera to a TVD-SNB wall mount with a TVD-CB3
cup base:
1.
Route
the camera cables through the wall mount. Attach the swan
neck mount
to the wall using
the expansion anchors that are
provided
with the swan neck mount
.
2.
Screw the cup base onto the swan
neck mount
and tighten
with the
locking screw, as shown
below
(A).
Then attach the camera adapter
plate
to the cup base
(B) using screw A
.
Note:
The mounting plate is shipped with the camera.
The image
may not match the actual plate supplied. The included plate varies
depending on the camera
.
