TruTech KLV3112A, Руководство пользователя

Страница: 28 / 32

27 HOW IT WORKS
TV SETUP TV SETUP
TV SETUP TV SETUP TV SETUP
TV Channel Setting TV Channel Setting TV Channel Setting TV Channel Setting TV Channel Setting
1. Press the TV MENU
TV MENU
TV MENU TV MENU TV MENU button.
2. Use the or button to select TV CHANNEL SETTING.
3. Use the or button to select the options (Antenna /
(Antenna / (Antenna / (Antenna / (Antenna /
Auto Scan / Auto Scan Add CH / Channel Skip / Channel Auto Scan / Auto Scan Add CH / Channel Skip / Channel Auto Scan / Auto Scan Add CH / Channel Skip / Channel Auto Scan / Auto Scan Add CH / Channel Skip / Channel Auto Scan / Auto Scan Add CH / Channel Skip / Channel
No. / Channel Label)
No. / Channel Label)
No. / Channel Label) No. / Channel Label) No. / Channel Label).
4. Use the or button to make adjustment. The screen
will change to your selected mode immediately. Press
the TV MENU
TV MENU TV MENU TV MENU TV MENU button to return to the previous menu.
5. Repeat steps 2 to 4 to adjust other options.
6. To exit the TV SETUP MENU and return to the normal
screen, press the EXIT EXIT
EXIT EXIT
EXIT button on the remote control.
NOTE: Channel No. : 2-69 Channel for Air, 1-135 Channel
for CATV.
Channel Label Channel Label
Channel Label Channel Label Channel Label: You may edit one label for each channel.
1. Select the Channel Label item and press the or
button to go into the channel label edit screen.
2. Use the or button to enter the number or letter.
3. Use the or button to move and edit for the next
character.
4. After editing, press the DISPLA DISPLA DISPLA DISPLA DISPLAY Y Y Y Y button and the Channel
& Channel Label will be shown on the screen.
Antenna Antenna Antenna Antenna Antenna : Select “CATV” to receive cable signal.
Select “AIR” to receive air signal.
Auto Scan Auto Scan Auto Scan Auto Scan Auto Scan : Automatically search all channels for
those with adequate signal strength.
Auto Scan Add CH Auto Scan Add CH
Auto Scan Add CH Auto Scan Add CH Auto Scan Add CH: The stored channels can not be cleared
and the Auto Scan Channels will be
added.
I f y o u h a s s e l e c t e d C AT V i n T V
CHANNEL SETTING, then you can
select Cable System (AUTO / STD /
HRC / IRC) in the sub menu as the
picture shown.
Channel Skip Channel Skip Channel Skip Channel Skip Channel Skip: You may switch ON/OFF the skip
function of each stored channel by
selecting the channel with or
button (and using or button to
select page if the amount of stored
channels in more than 1 page), and
followed with pressing the ENTER
ENTER ENTER ENTER ENTER
button.
Auto Scan Add CH
Channel Skip
Channel No.
Channel Label
UP/DOWN ADJUST “MENU”:EXIT
Antenna
Auto Scan
Air