TruTech 15", Руководство пользователя

Страница: 2 / 20

2
SAFETY PRECAUTIONS
* SEE REAR OF UNIT FOR
GRAPHIC SYMBOLS *
The exclamation point within
a triangle alerts you to the
pr esence of important
operating, maintenance and
servicing instructions in this user’s
manual.
The lightning flash with an
arrowhead within a triangle
alerts you to uninsulated
dangerous voltage within the
product's enclosure that
could cause an electric shock.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SER VICING TO QUALIFIED
PERSONNEL.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
DO NOT PLACE OBJECTS FILLED
WITH LIQUIDS ON OR NEAR THIS
UNIT.
CAUTION: DANGER OF EXPLOSION IF
BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH
THE SAME OR EQUIVALENT TYPE.
PLACEMENT INFORMATION
• Do not use this unit in places which are extremely hot, cold, dusty, or humid.
• Do not restrict the air flow of this unit by placing it somewhere with poor air
flow, by covering it with a cloth, or by placing it on bedding or carpeting.
FCC INFORMATION
This device complies with the Part 15 of FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesirable operation.
SAFETY INFORMATION
• When connecting or disconnecting the AC cord, grip the plug and not the
cord itself. Pulling the cord may damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect
the AC cord.
CONDENSATION INFORMATION
• When left in a heated room where it is warm and damp, water droplets or
condensation may form inside the unit. When there is condensation inside
the unit, the unit may not function normally. Let the unit stand for 1-2 hours
before turning the power on, or gradually heat the room and let the unit dry
before use.
RATING PLATE LOCATION
The rating plate is located on the
rear of unit.
WARNING: Should any problems
occur, disconnect the AC cord
and refer servicing to a qualified
technician.
The symbol for Class II
(Double lnsulation)