FRS BASE STATION OPERATION
Powering the Base Station ON -
Press and HOLD the power button for two
seconds. A tone will indicate the unit is ON;
the LCD will display settings saved from
your last radio use.
Powering the Base Station OFF -
Press and HOLD the power button again for
two seconds. A tone will sound and the LCD
panel will go dim. The radio will automatically
save the current function settings.
Adjusting the Speaker Volume - With the radio on, press the VOLUME
UP (
I
) button to increase volume; press the VOLUME DOWN (
J
) button
to decrease volume. The volume indicator icon (number 1 - 8) will change
according to your setting. Hold the VOLUME UP (
I
) or DOWN (
J
) button
to scroll through settings. A double beep will sound when the volume reaches
the highest (8) and lowest (1) settings.
Channel Selection - Press and release the CHANNEL UP (
I
) or DOWN
(
J
) button to reach the desired setting. Hold the CHANNEL UP (
I
) or
DOWN (
J
) button to scroll through the channels.
"PrivateTalk" Sub-channel Selection - Press and release the
FUNC button until the small numbers next to the channel number display
flash on the LCD. Select the PrivateTalk sub-channel (01 - 38) by a press
and release of the CHANNEL UP (
I
) or DOWN (
J
) buttons* until the
desired PrivateTalk sub-channel is displayed. To select that sub-channel,
press and release the P-T-T button. If your beep tone indicator is active, a
tone will confirm your selection. A PrivateTalk sub-channel setting of (00)
deactivates the PrivateTalk feature and allows ALL radio conversations
on that channel to be heard.
If no PrivateTalk sub-channel selection is made after 10 seconds, the radio
will save the last change and return to operational mode.
7
